MEGAPOWER MVP-886 - Manual (Page 28)

- 24 -
8.4 PAL / NTSC
This option is functional only when the output signal is on CVBS.
8.5 FACTORY
Restore factory settings and all images will be lost.
9 Expand center control system
This expand center control system must work with our visualizer, it
can not carry out function by itself. With the expand center control
system, you can carry out the following actions:
a.
Turn on/off the visualizer, projector and screen simultaneously.
It also can turn on or turn off the projector separately during the
presentation.
b.
Projector hang-shut. Before shut down the projector, it turns the
projector into standby mode first, and then shut it down.
c.
CS-100 is a mini amplifier, it can be connected with speaker
directly.
d.
It controls the projector signal switch separately during the
presentation.
e.
It controls the screen separately during the presentation.
10 RS-232
RS-232 software needs to be installed which are in the attached
disk. Please refer to the HELP for details.