Meinberg TCR511 - Manual (Page 26)

26
The program TCRMON
The program TCRMON can be used to program the time offset from UTC and the initial
time of Meinberg IRIG-Receivers. The Software is executable under Win9x/2k/NT. To
install TCRMON just run Setup.exe from the included diskette and follow the instruc-
tions of the setup program
To obtain a serial connection from IRIG receiver to PC, serial port COM0 of TCR must
be connected to a free serial port of the PC. The host PCs serial port as well as baudrate
and framing can be selected on tab sheet ‚PC-Comport’. The selected serial parameters
of the PC must match to those of the TCR ( see DIP Switches ). Further, serial mode of
the TCR must be set to STRING_PER_SECOND.