MicroLinks UM02 - install manual - Manual (Page 12)

Microscope Installation Instruction http://www.ViTiny.com
12
Copyright © 2008-2012 MicroLinks Technology Corp.
3.1.4 Install Completed
Click “finish” to complete Driver Install program. See Fig 3-5.
Fig.3-5 Driver installation completed
3.1.5 After installation completed
After installation is completed, the window on the right corner will show a video icon
Fig.3-6. Start -> all programs will find Device Driver shown as Fig.3-7.
Fig.3-6 USB Video Device icon
MICROSCOPE can be executed from ICON AMCap as below Fig.3-6. However, AMCap is a
simple tool for preview only and can’t support image process as the MICROSCOPE AP.
Fig.3-7 USB Video Device is at all programs position.