MicroLinks UM02 - install manual - Manual (Page 5)

Microscope Installation Instruction http://www.ViTiny.com
5
Copyright © 2008-2012 MicroLinks Technology Corp.
2. Install/Uninstall MICROSCOPE application program
Please select the Fig 1-1 Install program and setup application program button to install
MICROSCOPE program.
2.1 Install application program
2.1.1 Start setup program
Click setup application program, after it will pop up (please select a language) window on
Fig.2-1, the initial language will follow up the pc OS system. If you want to cancel setup please
click “Cancel” then click “OK”.
Fig.2-1 Setup language window
2.1.2 Welcome to the MICROSCOPE Setup Wizard
After choosing the language, go to welcome to the MICROSCOPE setup wizard window
see Fig.2-2, then please click “Next” then continue. If want to cancel please click “Cancel”
button. In the following figs, “name” represents MICROSCOPE’s application program name,
“X.XXX.XXXx” represents the application program version.
Fig. 2-2 Welcome to the MICROSCOPE setup wizard