Mini Tec 520000 MTD Kit - Manual (Page 11)

11
Honda Axle End Assembly: Assemble large splinned side of axle with the Honda
cv joint assembly. (See following four Photos)
Axle Installation:
Simply slide one of the axles into the transmission and the
other into the engine mid-shaft until the axles lock into place.
Swivel Hubs and Brakes:
Install the Swivel Hubs and Brakes as done on stock Mini.
Master Cylinder:
Depending on your setup, you may have to relocate one of your master cylinders. If
you have both master cylinders on the right side of the car, then they are clear. If you
have both master cylinders on the left side, then the brake master cylinder will have
to be relocated. We recommend getting a left hand drive conversion pedal box. This