Montigo H38DF PRC - Manual (Page 7)

H*38DF PRC Panorama Indoor Gas Fireplace
Page 7 XG0211 - 150204.1
Installation
Section 2: Framing
Note: Images are shown without screens for clarity purposes. However,
your fireplace should not be operated without proper installation of
screens.
1). Frame in the enclosure for the unit with framing materials. The
framed opening for the assembled fireplace is 40 3/4" wide, x 44"
high x 24 1/2" deep, see Figure 2 .
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. See Figure 21.
Figure 2. Framing dimensions.
24 1/2”
40 3/4”
44”
Figure 3. Combustible Framing for shelves over the fireplace, Rear vent.
Note: HP38DF* CANNOT be straight run rear vented with wall termination.
Figure 4. Combustible Framing for shelves over the fireplace, Top vent.
‡ HP38DF* is 59"
Figure 5. Non Combustible Framing with alcove above fireplace, Top Vent.
11”
29
Combustible
Framing Header
shelf
33 1/2”
44”
1” Min.
12” Max.
46” ‡
17 1/2”
MEL Short
90 elbow
shelf
Combustible
Framing / Header
44”
1 Min.”
Floor
39 5/8” door
opening
44”
Combustible
Header
Min. 1 ”
2”
Ceiling level
Non-Combustible
Header
Non-Combustible
materials. Alcove
over fireplace.
Top Vent
Non-Combustible
Materials, with Low
profile mantel / Alcove
over fireplace.
84”
Min.