Montigo RFK3002 - Manual

Optional Fan Kit
Installing the RFK3002/3004 Fan Kit
Page 1 XT0018 - 150324

This kit should be installed by a qualified person.

Check local codes and read all instructions prior to installation.
Ensure that all power to the appliance is off at the electrical breaker or fuse
before beginning installation. Ensure gas is turned off at the shutoff valve before
beginning installation.
CAUTION
Optional Fans
for use with:
B34 DV2; B34 DV2-F
B38 DV2; B38 DV2-F
General Information
This blower kit is for installation with the models listed above.
®
C US
Before You Begin
• Please read all instructions carefully
• We strongly recomment that all electrical service work be per-
formed by a qualified electrical contractor.
• Check to ensure that all components required for installation are
included in your package.
KIT # Contents
RFK3002 2 fans, 1 PPO box, 1 wire harness (PCH2), speed
controller (DRB001), 10 screws (HW2054),
heat-activated control and speed control
RFK3004 4 fans, 1 PPO box, 1 wire harness (PCH4), speed
controller (DRB001), 20 screws (HW2054),
heat-activated control and speed control
Figure 1 Kit contents (RFK3002).
Figure 2 Kit contents (RFK3004).
PPO Box
Fans
DRB001
PCH2
Fans
PPO Box
DRB001
PCH4
WARNING
When installing the fireplace - gas lines, fittings,
accessories or any other objects cannot impede the
proper movement of the door buckles.