How to set up the wemo™app – Mr. Coffee PSTX91WE User Manual

Page 5

Advertising
background image

8

9

To Restore

Restore Button can be used to reset the memory of the Smart Coffeemaker

and to connect it to a new router. Steps are:

Unplug unit
Press Restore Button
While pressing Restore Button, plug unit back in and keep

Restore Button pressed for 10 seconds

This will cause the unit to reboot and you will need to go through the full setup

again (refer to page 8).

Download the free WeMo™ App from the Apple App store, Google Play or

Amazon App store.

Plug Smart Coffeemaker into electrical outlet.
Confirm your Wi-Fi® router is on.
Make sure your smart device is connected to your home Wi-Fi® network.

A check mark will

appear once you are

successfully connected

to your Smart

Coffeemaker. You can

now exit Settings.

Your Wi-Fi® network will

automatically detect your smart

appliance(s). Select the WeMo™

labeled Wi-Fi® network for your

Smart Coffeemaker.

Open the WeMo™ App. The App

will look for your connected

appliance. When prompted, choose

your home network, and enter the

network password. Your Smart

Coffeemaker will now appear on

the App’s main menu. WeMo™

Remote Control is now enabled.

You will not need to complete

these initial set-up steps again for

your Smart Coffeemaker.

HOW TO SET UP THE WeMo™APP

HOW TO SET UP THE WeMo™APP

1

2
3
4

6

7

8

NOTE: The appliance can still be operated directly from the appliance

control panel in case of a router outage. Any pre-programmed

schedules will still function in case of a router outage.

NOTE: To disable WeMo™ Remote Control, disconnect the

power cord. WeMo™ Remote Control will automatically be

re-enabled when the unit is plugged back in.

Enabled

Disabled

Open your settings

menu and select

‘Wi-Fi® Network.’

5

Make sure your first cup of coffee is as good as can be by cleaning your MR. COFFEE®

Smart Coffeemaker before its first use. Just follow these simple steps:

Wash the decanter, decanter lid and the filter basket in a mixture of mild

detergent and water. Rinse each thoroughly (please refer to the Parts Diagram).

Replace all the parts and attach the water reservoir. Then, run a brew cycle with

water only, without adding coffee and coffee filter.

When brewing is complete, turn your Smart Coffeemaker off, discard the water in the

decanter and rinse the decanter, decanter lid, and filter basket.

Your Smart Coffeemaker is now ready to use. Enjoy it!
NOTE: For regular cleaning and maintenance after the first use,

please go to the CLEANING AND MAINTAINING YOUR

MR. COFFEE® SMART COFFEEMAKER Section.

CLEANING YOUR MR. COFFEE®

SMART COFFEEMAKER BEFORE ITS FIRST USE

1

2

3

1

2
3

BVMC-PSTX91WE_14EM2.indd 8-9

26/08/14 9:16 AM

Advertising