MultiDyne HD-3500 Series - Manual (Page 15)

Instruction Manual, HD-3500 Series APPENDIX C. Technical Specifications 12
REV F, April 1, 2015
Receiver (-FRX)
SDI/HDSDI Transport:
Wavelength ....................................................................................... 1100 to 1600nm
Optical Sensitivity ............................................................................. -20 dBm
Output Type ...................................................................................... 2 X BNC
Output Impedance ………………………………………………… ........ 75 ohms
Output Return loss ............................................................................ >15 dB up to 1485MHz
>10dB up to 3 GHz
Added Jitter: ...................................................................................... <0.03UI under 1MHz
Audio:
Analog output level selections ........................................................... 28/16/10/4 dBu FS
Bandwidth .......................................................................................... +/- 0.5dB 20 to 20KHz
THD ................................................................................................... <0.01%
Analog Impedance output ................................................................ < 10 ohm
AES impedance output ..................................................................... 75 / 110 Ohm
Data:
Data rates for .................................................................................... DC to 3Mbps
Input RS232 range ............................................................................ +/- 25V max, 2V min
Input RS422/485 range ..................................................................... -7V to 12V, 0.2V diff min
Out RS232 levels ............................................................................... +/- 5V
Out RS422/485 levels ........................................................................ 0 / 2.3V
GPI off current (using open collector) ................................................ <1mA
GPI on voltage (using a voltage source) ............................................ 2.5 to 5 V
GPO on switching current .................................................................. 2 A max
GPO on switching voltage ................................................................. 48V max
Specifications are subject to change without notice.