OnLine Power Constant Power 3 - Manual (Page 39)

OnLine Power
6002-034 REV. C A-1
APPENDIX A - SPECIFICATIONS
CONSTANT POWER 6 CONSTANT POWER 3 MINI-POWER
Sizes 3, 5, 8, 10, 15 kVA 1, 1.5, 2, 2.5, and 3 kVA 1, 1.5, and 2 kVA
Input Voltage 120 or 208/220/240 or 480 VAC 120, or 208, or 240 VAC
Output Voltage 120 or 120/240 VAC
Frequency 60 Hz +5%
Transformer Type Single Phase Computer-Grade, Dual-Shielded, Isolation Transformer
Transformer Impedance 3 to 5% maximum
Efficiency 96% minimum
Load Power Factor 0.3 Leading or Lagging to Unity
Harmonic Distortion 3% Individual, 5% Total at Switching
Audible Noise <35 dB. Measured on Response Curve ”A”
Typical Noise Rejection Common Mode: -120 dB
Normal Mode: -60 dB/decade
Input Voltage Regulation
Range
+10% to -26% of nominal +7% to -23% of nominal
Output Voltage Regulation
Range +3% Typical
+4% All Line-Load Cond.
+5%
Cooling Convection
Response Time 1 Cycle Typical
Loading Rating Continuous, Regardless of Load/Line Conditions
Overall Inrush Rating 200% for 10 seconds; 1000% for 1 Cycle
Environmental
Operating Temperature 32 ° F (0 ° C) to 104 ° F (40 ° C)
Storage Temperature -4 ° F (-20 ° C) to 140 ° F (60 ° C)
Operating Humidity 10 to 95% Non-Condensing
Dimensions
Height 19.5” (49.5 cm) 10.5” (26.8 cm) 1 2” (30 cm)
Width 14.5” (36.8 cm) 11” (28.2 cm) 6.5” (17 cm)
Depth 25.5” (64.8 cm) 15.5” (39.7 cm) 12” (30 cm)