Draytek 2910 - Manual (Page 55)

Vigor2910 Series User’s Guide 49
3 3 . . 2 2 . . 4 4 B B i i n n d d I I P P t t o o M M A A C C
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Disable Click this radio button to disable this function. All the settings on
this page will be invalid.
Strict Bind Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
ARP Table This table is the LAN ARP table of this router. The information
for IP and MAC will be displayed in this field. Each pair of IP
and MAC address listed in ARP table can be selected and added
to IP Bind List by clicking Add below
.
Add and Edit IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
Refresh It is used to refresh the ARP table. When there is one new PC
added to the LAN, you can click this link to obtain the newly
ARP table information.
IP Bind List It displays a list for the IP bind to MAC information.