Draytek 2910 - Manual (Page 76)

Vigor2910 Series User’s Guide 70
Applications >> Schedule setup. The default setting of this filed is
blank and the function will always work.
Direction Set the direction of packet flow (LAN->WAN/WAN->LAN). It is
for Data Filter only. For the Call Filter, this setting is not
available since Call Filter is only applied to outgoing traffic.
Source/Destination IP Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
To set the IP address manually, please choose Any Address/Single
Address/Range Address/Subnet Address as the Address Type
and type them in this dialog. In addition, if you want to use the IP
range from defined groups or objects, please choose Group and
Objects as the Address Type.
From the IP Group drop down list, choose the one that you want
to apply. Or use the IP Object drop down list to choose the object
that you want.
Service Type Click Edit to access into the following dialog to choose a suitable
service type.