Osburn AC01340 - Manual (Page 10)

10
PC BOARD INSTALLATION AND WIRING
Depending on the fireplace options, choose the appropriate installation instructions:
A) Fireplace equipped with a wiring terminal
B) Fireplace not equipped with a wiring terminal
*Note: Keep in mind that when installed to a decorative fireplace heat distribution blower
will take longer to reach optimum efficiency as opposed to higher rated units,
which may cause the fan to cicle.
A) Fireplace equipped with a wiring terminal
1
Before installing the PC board assembly, open the bottom louver of the fireplace and
remove the wire knock-out on the left hand side of the air jacket. Install the box
connector (60201) and bring in the wire coming from the blower as shown in Figure 1.
Figure 1