Osburn AC02585 - Manual (Page 5)

Splitz-it 5-tON electric lOg Spliter Splitz-it 5-tON electric lOg Spliter
5
SpEciFicATiONS AND ELEcTRicAL REQUiREMENTS
AppLicATiON cONDiTiONS
The Splitz-it 5-Ton Electric Log Splitter has been designed as a
home use model only. It is designed for operating at ambient
temperatures between 40° F. and 105° F. The log splitter can
be stored or transported under ambient temperatures be-
tween -10° F. and 130° F.
SpEciFicATiONS
Model Number Ac02585
Motor 120V~60Hz
1500w ip54
circuit protection
Requirements
20 Amps
(Amperes)
Log capacity
Diameter * 2 - 10 inches
Length 20 inches
Splitting Force 5 ton
Hydraulic pressure 2,300 psi
Hydraulic Oil capacity 3.75 quarts
Overall Size
Length 37 inches
width 11 inches
Height 20 inches
weight 105 lb
*The diameter of the log is not indicative - a small log can be difficult
to split when it contains knobs or a particularly tough fiber. On the
other hand, it may not be difficult to split logs with regular fibers
even if its diameter exceeds the maximum diameter described in the
specifications chart.
SAFETY DEcAL
The Splitz-it 5-Ton Electric Log Splitter has been designed and
manufactured to provide you with the safety and reliability
you would expect from an industry leader in outdoor power
equipment manufacturing.
Reading this manual, and the safety instructions it contains,
will provide you with the necessary knowledge to operate this
equipment safely and effectively. We have placed a safety de-
cal on the log splitter to remind you of some of the important
information while you are operating the unit.
This important safety decal is illustrated below, and is shown
here to help familiarize you with the location and content of
the safety messages you will see as you perform normal log
splitting operations. Please review this decal now, and if you
have any questions regarding its meaning or complying with
these instructions, reread the complete safety instruction text
in this manual, or contact your local dealer.
the decal below is located on the side panel of the log cradle
above the main power switch. Should this decal become un-
readable, because of being worn, faded, or otherwise damaged
during the use of your log splitter, please use the part number
information provided to order a replacement label from your
local authorized dealer. These decals are easily applied, and will
act as a constant visual reminder to you, and others who may
use the equipment, to follow the safety instructions necessary
for safe, effective operation of your log splitter.
warning Decal
1 2 3 4 5
6 7 8 9 10 11
ELEcTRicAL REQUiREMENTS
Connect the main leads to a standard 110V ±10% electrical
supply which has protection devices under-voltage, over-volt-
age, over-current, as well as a ground fault circuit interrupter
(GFCI) or a ground fault interrupter (GFI) with a maximum
residual current of 0.03A.
1. Crush hazard - hand
2. Take care when removing jammed logs from wedge
3. Clean up any spills
4. Read owners manual be fore using
5. Use protective eyeware
6. Danger - Keep clear of moving parts
7. Unplug before servicing
8. Maintain a safe distance from bystanders when operating
9. Do not operate without guards
10. Use protective footware
11. Use protective gloves.
SBIOMWENGSplitzIt.indd 5 1/10/2012 8:14:43 AM