OWON TDS Series User Manual
Tds series, User manual
Advertising
Table of contents
Document Outline
- Table of Contents
- 1. General Safety Requirements
- 2. Safety Terms and Symbols
- 3. General Characteristics
- 4. Junior User Guidebook
- Introduction to the Structure of the Oscilloscope
- User Interface Introduction
- How to Implement the General Inspection
- How to Implement the Function Inspection
- How to Implement the Probe Compensation
- How to Set the Probe Attenuation Coefficient
- How to Use the Probe Safely
- How to Implement Self-calibration
- Introduction to the Vertical System
- Introduction to the Horizontal System
- Introduction to the Trigger System
- Introduction to the Touchscreen Controls
- 5. Advanced User Guidebook
- How to Set the Vertical System
- Use Mathematical Manipulation Function
- Use VERTICAL POSITION and VOLTS/DIV Knobs
- How to Set the Horizontal System
- How to Set the Trigger System
- How to Operate the Function Menu
- How to Implement Sampling Setup
- How to Set the Display System
- How to Save and Recall
- To save the current screen image
- To save waveform data to reference waveform/storage
- To save setup files
- To display/remove reference waveforms
- To recall waveform data in storage
- To recall setup files
- To select the path or file in file explorer
- To edit file names
- To save with Copy button push
- To manage file
- How to Implement the Auxiliary System Function Setting
- How to Measure Automatically
- How to Measure with Cursors
- How to Use Autoscale
- How to Use Executive Buttons
- 6. Communication with PC
- 7. Demonstration
- 8. Troubleshooting
- 9. Technical Specifications
- 10. Appendix