Erasing, Erasing tracks, Erasing a whole disc – Paso Sound PCDRW900SL User Manual
Page 29: Refreshing a disc, Erasing tracks erasing a whole disc, 6 − after recording, Important safety instructions
IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-RW900SL
6 − After recording
TASCAM CD-RW900SL
Refreshing a disc
Refreshing the disc makes a disc usable again. This opera-
tion destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL
key on the front panel or the
ERASE
key on the remote control. Select the
REFRESH?
rotating the
MULTI JOG
dial or pressing the
SKIP
key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key
on the remote control to enter the function. The
display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
3. Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows
Erase
flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed,
Complete
appears
then
Blank Disc
will appear on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on a
disc), follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the
ERASE/DEL
key on the
front panel or the
ERASE
key on the remote control.
Select the
ERASE DISC?
by rotating the
MULTI
JOG
dial or pressing the
SKIP
key on the remote
control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key
to enter the function. The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
3. Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows
Erase
flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased,
Complete
appears
then
Blank Disc
will appear on the display.
Erasing tracks
Erasing
This operation erases the specified track and all sub-sequent
tracks from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing track is operated only when unit is in continu-
os playback.
1. While stopped, press the
ERASE/DEL
key on
the front panel or the
ERASE
key on the remote
control. Select the
ERASE TRACK?
rotating
the
MULTI JOG
dial or pressing the
SKIP
key on the
remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2. Push the
MULTI JOG
dial or press the
ENTER
key
to enter the function.
The display shows
Erase XX-XX
(the number of
the first track and last track to be erased).
Rotate the
MULTI JOG
dial or press the
SKIP
key to
change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
3. Push the
MULTI JOG
dial or press the
ENTER
key to
operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
4. Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows
Erase
flashing and the remaining
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased,
Complete
will
appears on the display.