Paso Sound P202MKV - Manual (Page 17)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM 202 MK V
17
4 − Recording
8. When everything is ready, start recording by
pressing the PAUSE key or the PLAY key whose
arrow points in the same direction as the indi-
cator.
To record on both tape sides, set the REV MODE
switch to Ê or ä and press the forward PLAY
(y) key. If you press the reverse PLAY (h) key,
recording will be done only on side “B”.
To stop recording, press the STOP ( ª ) key.
A To stop recording temporarily
Press the PAUSE key to stop recording temporarily.
A second press of the key resumes recording.
To erase recordings
When you make a recording, the tape is overwritten
(previous recording is erased). To erase a tape without
making a new recording, set the
INPUT control to the
minimum (0) position and press the RECORD (º) key
followed by the PLAY (h or y) key.
Quick record start
Hold down the RECORD (º) key and press the PLAY
(h or y) key corresponding to the direction you
want the tape to run.