Changing the image quality, Movies) (p. 108), Images (p. 108) – Canon POWERSHOT SX201S User Manual
Page 108: Ies) (p. 108), P. 108), Co py
108
You can choose between three image quality settings.
Choose the image quality.
●
After pressing the
m button, press the
op buttons to choose
.
Choose an option.
●
Press the
qr buttons or turn the  dial
to choose an option, and press the
m
button.
X
The setting will display on the screen.
Image Quality Table
Estimated Shooting Time
Changing the Image Quality
Image Quality
(Recording Pixels/Frame Rate)
Content
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
320 x 240 pixels, 30 frames/sec.
Since the number of recording pixels is smaller,
the image quality will be lower than with
,
but you can record three times the length.
Image Quality
Shooting Time
2 GB
8 GB
10 min. 33 sec.
42 min. 11 sec.
22 min. 45 sec.
1 hr. 30 min. 57 sec.
1 hr. 4 min. 1 sec.
4 hrs. 15 min. 51 sec.
•
Based on Canon’s testing standards.
•
Maximum clip length is approximately 29 minutes and 59 seconds in
, 1 hour in
and
. Recording also stops when the file size reaches 4 GB.
•
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
In
and
when the recording pixels setting for still images is set to
, a gray frame will appear around the area that can be shot as a still
image.
CO
PY