Canon POWERSHOT SX201S - Manual (Page 152)

152
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds. However, when starting the
camera with the viewfinder display, the start-up image will not display, and
there will be no start-up sound.
Change Sounds
● Choose [Sound Options], then press the m
button.
● Press the op buttons or turn the  dial to
choose an option.
● Press the qr buttons to choose a setting.
Changing the Start-up Screen
● Choose [Start-up Image], then press the m
button.
● Press the qr buttons to choose a setting.
Registering the Start-up Screen
When you press the
1 button and set the camera to Playback mode, you
can register sounds and images.
● Choose [Start-up Image], then press the m
button.
● Press the
qr buttons to choose [2], then
press the m button.
Changing the Start-up Image or Sound
1 Preset sounds.
2
You can register your sounds using the supplied
software (p. 153).
No start-up image.
1 Preset images.
2 You can register your images.
CO
PY