Canon POWERSHOT SX201S - Manual (Page 65)

65
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the
p button.
Choose
Ò.
● Press the op buttons or turn the  dial
to choose Ò, then press the m button.
X Once set, Ò will appear.
Shoot.
● Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
● To cancel shooting with the self-timer after
countdown has started, press the
p
button.
● To restore the original setting, choose
in Step 2.
Using the Self-Timer
You can change the delay time and number of shots (p. 78).
CO
PY