PSE Archery Viper Series Crossbow - Manual (Page 4)

Compound Crossbow Assembly
Before shooting your crossbow some basic assembly is required.
The crossbow hardware package contains the following:
A. Front sight mount
B. Rear Sight
C. 2 ea sight mounting screws
D. 2 ea small flat washers
E. 1 ea lock washer
F.
1 ea flat washer
G. 1 ea prod attachment screw
H. 2 ea sight pins
I.
Cable slide
NOTE: Some models do not include the sight parts.
A
G H
B
C
E
F
D
Fig 2
I
-4-
Cocking Stirrup (set screws
pre-installed in prod)
Prod
Stock assembly
Fig. 1
Fore-end
Cable Slide