PSE Archery Viper Series Crossbow - Manual (Page 7)

Quiver Installation:
Parts to install quiver:
A) Quiver Mount Bracket
B) Backing plate
C) Self-tapping screws
D) Flathead screws
Place backing plate (B) over two holes on underside of prod (Fig
2) and secure with the two flat head screws (C) with the Allen key
provided.
Secure the Quiver Mount Bracket (A) to the quiver using the self-
tapping screws (D) with a Phillips screwdriver (Fig 3). Engage the
quiver with the quiver backing plate at a 45° angle as shown in
figure 4. Rotate the quiver into position (Figure 5) and lock in place
with the lever (Figure 6). NOTE: The quiver can be installed in
either direction.
B
-7-
A
C
D
B
Figure 1
Figure 2
Figure 3
Fig 5
Fig 6
lever
Figure 4