Rena TB-690 - Manual (Page 7)

5
Drop Tray Kit Installation Instructions
( Part # Drop Tray-TB )
NOTE: This optional drop tray was designed for conveyors that are set for Left to Right transport.
1. Remove the three screws attaching the Stacking Tray to the
conveyor. Remove the Stacking Tray and discard.
2. Install the Drop Tray Mounting Plate to the Right-Hand end of
the Conveyor using the five screws supplied.
3. Assemble the Drop Tray as shown and install it on the
Mounting Plate as shown.
4. Install the Guide Rollers to the side frames of the Conveyor
Body using the screws provided.