Research Concepts RC3000 User Manual
Page 16
RC3000 Antenna Controller
Chapter 1
Introduction
8
Programming Group Functions
The programming group modes provide for initial configuration of the controller and also provide screens
to aid in maintenance and troubleshooting of the controller.
Configuration mode screens allow the user to customize and calibrate the operation of the RC3000 for
use with a particular mount. Note that most configuration items will be factory set for correct operation
with a particular mount.
REF_VOLT:2.50 OFF: 0.0 CONFIG-AZIM
CCW:180 CW:180 SF:76.35
SET REFERENCE VOLTAGE <2.00 - 3.00>
Maintenance mode screens allow the user to monitor sensor inputs and perform periodic maintenance
actions such as setting time and resetting drive errors.
SYSTEM:11/10/97 22:26:40 TIME
GPS UTC:11/10/97 22:26:40 ZONE:CST
DISPLAY:11/10/97 16:26:40 OFFSET:- 6
1-DATE 2-TIME 3-SYNCH 4-ZONE 5-OFFSET