Dolby Laboratories Personal Video Recorder - Manual (Page 45)

Page 45 of 46
SPECIFICATIONS
General specifications:
Voltage: AC90V-260 50/60 Hz
Consumption-operate mode - 40 W
Consumption-standby mode: less
than 2W
Size: 430x440x60 mm
Weigh: 5 Kg
Temperature: 5-40º C
Humidity: 15-75%
DVD
Supports DVD, SVCD, CVD, VCD
1.0/1.1/2.0, YOU CD-GIVES,
MP3, KODAK PICTURE CD, CD-
R/RW.
Output-video: 1.0Vp-p 75 Ohms.
Output-audio: 1.0-2.0V 10 K ohms.
S/N: >90 DB
Frequency response: 20 Hz–
20Khz +-1dB.
Channel separation: > 80dB
Dynamic range: >80dB
HARD DISK
Capacity with 40 Gb Hard Disk
:
XP: NTSC 720X480 / PAL 720X576:
10 hours 45mins.
SP: NTSC 720X480 / PAL 720X576
14 hours.
LP: NTSC 544X480 / PAL 544X576
21 hours.
EP: NTSC 352X480 / PAL 352X576
40 hours.
Three recording modes: PAL, NTSC,
SECAM.
Input sources S-video, DVD, TV, HD,
etc...)
Recordings
Video outputs: 1.0 + - 0.2V 75 ohms.
Audio outputs: + - 1 dB 10K
Frequency response: 20 Hz–
20Khz +-2dB.
Separation between channels:
> 80dB
Dynamic range: >80dB
S-Video
Video outputs 0.7+- 0.14V p-p 75
Ohms.
C: 0.88 +- 0.176VP-P 75 OHMS.
Colour: 0.15–0.3Vp-p 75 Ohms.
Input: 100% color 1.0Vp-p.
TV
Video output: 1.0 + - 0.2V 75 Ohms.
Audio output: +-1dB 10K Ohms.
Frequency range:
VLH: 49.75-170.00 MHz
VHF: 170.00-450.00 MHz
UHF: 450.00-863.25 MHz