Dolby Laboratories Personal Video Recorder - Manual (Page 46)

Page 46 of 46
BASIC FAULT FNDING
No sound, No Video:
- Check all the cables give audio are
connected correctly.
It is not possible to use an
external source:
- Check the input connections.
-Check the external source.
External source errors:
- Check the input cables are correctly
connected.
- The source signal is very weak.
- The source format is not correct.
No sound during
playback:
-Check that the MUTE function is not
activated.
The remote control doesn't work:
-Check the batteries.
Long initiation time:
(more than 20 seconds):
-Check that the hard disk is
correctly connected.
The new hard disk you cannot
be used:
-The disk must be partitioned and
formatted before use.
Corrupt recording:
-Repair or defragment the hard
disk.
TV channels cannot be scanned:
- The aerial is not connected
correctly.
- The source format is not
correct.
Weak TV reception:
-Check that the aerial gives good TV
reception.
- Use fine tuning to improve the
reception.
- The source format is not
correct.
Recordings have no colour:
- The source format is not
correct.