RF Neulink NL900PRO - Manual (Page 3)

1
N L 9 0 0 P R O R F T R A N S C E I V E R 1
The NL900PRO transceiver is a Frequency-Hopping Spread Spectrum (FHSS) radio designed for license-free
operation in the 900 MHz ISM band. The radio sustains a standard asynchronous serial data stream
between two or more radios out of the box. Housed in a compact and rugged die-cast enclosure, the radio
is equipped to replace miles of serial cable using a selectable RS232, RS485, or RS422 interface.
N L 9 0 0 P R O F E A T U R E S
N E T W O R K I N G A N D S E C U R I T Y
• Retries and Acknowledgements
• API Commands to control packet routing and acknowledgement on a packet-by-packet basis
• Frequency Hopping Spread Spectrum for security and interference rejection
• Customizable RF Channel number and system ID
• Dynamic link analysis, remote radio discovery
• Low latency and high throughput
E A S Y T O U S E
• Continuous 76.8 kbps RF data stream
• Software selectable interface baud rates from 1200 bps to 115.2 kbps
• Advanced configuration available using AT commands
O V E R V I E W
The NL900PRO uses Frequency Hopping Spread Spectrum modulation, where the units "hop" from frequency
to frequency many times per second using a specific hop pattern applied to all the transceivers in the same
network. A distinct hopping pattern is provided for each Channel Number, thereby allowing multiple
networks to co-exist in the same area without interference.
NL900PRO transceivers operate in a Point-to-Point or Point-to-Multipoint, Client-Server architecture. One
transceiver is configured as a Server and there can be one or many Clients. To establish communication
between transceivers, the Server emits a beacon and upon detecting a beacon, RF link is established with
the Client(s).
NL900PRO implement a proprietary communication protocol to provide secure data transmissions. The use
of FHSS technology ensures data reliability over long distances. Use of license free frequency bands ensure
that the units are ready for use with no further certification requirements.
Each unit is small and easily portable for use in mobile and temporary settings as well as for fixed
installations. The NL900PRO configuration software enables custom configurations based on unique
application requirements.