How to change the transition effects, How to choose the output format – RGBLink CP 3072 Quick Start User Manual
Page 12
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
11
How to Change the Transition Effects
1. Push the Effect Modes button in Effects Operation Area, there are 15 kinds of effect modes:
Push the wipe pattern shortcut button
,
there are 5 kinds of mode: ←□→, →□←, ←＋→,
→＋← and ←0→.
Push the wipe pattern shortcut button
, there are 5
kinds of mode: L→R, L←R, T→B, B→T and
III→.
Push the wipe pattern shortcut button
, there are 3
kinds of mode: L←M→R, T←M→B and
LT→RB.
Push the wipe pattern shortcut button
, user can choose cut mode.
Push the wipe pattern shortcut button
, user can choose fade in fade out mode.
2. Push the [TAKE] button, or use T-bar switcher to switch between the image with effects.
Note: T-bar is only available for fade.
How to Choose the Output Format
1. Push the [FORMAT] button in Output Format Setting Area, the button light is on, and enter to
the output formats menu items.
2. Turn the knob and choose the output format according to actual need, push the knob to confirm.