RGBLink CP 3072 Quick Start - Manual (Page 15)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
14
SELECT: Choose the channel for operation, user can choose the channel of A BUS or B BUS.
How to Use Black Out
Black out descriptions:
Black signal realizes one-key-touch to a black screen.
CP 3072 provides black effect processing for program output and preview output, with cut black
effect. Operation is as below:
Push the [BLACK] button in A-BUS/PGM bar, the button light is on, then the program output is
cut to black. Push the [BLACK] button in B-BUS/PST bar, the button light is on, then the
preview output is cut to black. The effect is shown as below:
How to Realize the BLEND Setting
1. First, set PIP mode, or user can not set blend.
2. Push the [BLEND] button in BLEND Operation Area, and enter to the blend menus.
3. Turn the knob, and choose <BLENDING>, push the knob to confirm. Turn the knob, choose
“ON”, push the knob to confirm.