RGBLink RMS 8424S User Manual - Manual (Page 48)

RMS 8424S User Manual 48
C. RMS 8424S Optional Module: SDI
Input Module
SDI is the optional module for RMS 8424S Rack Mount Monitor, it can be installed based
on user’s requirements.
The following is the picture of SDI input module:
Specific installation steps are as follows:
Step 1: Unscrew the screw above the rear panel with the screwdriver, take the rear panel
apart.
Step 2: Take two circuit boards inside apart respectively, the red box in circuit board is
the area for SDI input module installation.