Sea Eagle RazorLite Kayaks (393RL RazorLite, 473RL RazorLite) - Manual (Page 5)

Recessed Air Valves
The RazorLite features
3 Recessed One-Way
air valves for inflating
your Sea Eagle.
Remove the caps,
press and turn the
valve stems counter-
clockwise so that the
stem is in the UP posi-
tion. When the stems
are in the up position
the valve will retain air.
The RazorLite has a
working pressure of 10
psi.
Hand Pump
This T-handle pump
can easily reach the
working pressure for
the RazorLite. The
pump comes with a
mesh bag, manometer
(pressure gauge)and a
hose.
Look for the word
INFLATE with an arrow
on top of the handle.
This is where the pres-
sure gauge will attach.
Insert the gauge in the
opening and carefully
turn it to lock in place.
Take care not to break
the gauge.
While holding the
gauge, insert the hose
and turn to lock. Check
the hose end that goes
in the boat’s valve, it
should have hooks to
lock it in the valve
opening.
When ready to inflate,
insert the adapter into
the valve, turn it to the
right until it is fully
seated. Then begin
pumping.
Working pressure is 10
psi. If the boat is suffi-
ciently firm before
reaching 10 psi, you do
not have to inflate any
further. To avoid dam-
age, it is best to re-
move gauge from the
pump for storage.
4
RazorLite Kayaks | INFLATION: INFLATION: Valves & Pumps