Sea Eagle RazorLite Kayaks (393RL RazorLite, 473RL RazorLite) - Manual (Page 9)

PRO TIP: One shaft
section has holes for
feathering. By feather-
ing the paddle, the
blades are offset from
each other so that
when one blade is in
the water, the other is
at an angle to slice
through the wind with
little resistance.
Floor Drains
Make sure that the floor
drains are closed with
the caps tightened.
The drains should not
be open while on the
water.
Tall Back Seat
The TBS is made of
thermal molded foam.
Featuring a storage
pouch on the back with
built in zipper, the TBS
provides great lumbar
support with an 18"
high back rest.
Using the seat straps,
clip each strap to the D-
rings. The upper straps
attach to the forward D-
rings.
TIP: When getting in
the kayak, place your
weight on the seat pad
and try not to knock
back the upright back-
rest pad. Arch your
lower back forward and
avoid leaning high on
the back of the seat.
You will feel the seat
support your lumbar re-
gion.
Footrest
Slide clips onto the
strap. Insert free end
up through the center
of the buckle and down
through the front slot
making a foot long
loop. Slide the tube
onto the strap. Clip to
the D-rings. Adjust for
comfort. Trim excess
with a scissor. Melt
edge to keep it from
fraying.
Seating Positions
Shown below are the seating arrangements for the 393RL
and 473RL. The 473RL can be paddled solo or tandem
(boats not shown to scale).
8
SeaEagle.com/Instructions SeaEagle.com/Instructions
RazorLite 393RL
RazorLite 473RL
RazorLite 473RL
w/solo paddler