Sea Eagle 124 smb Super Motormount Boat (124SMB) - Manual (Page 5)

Inflation Valves & Pumps
One-Way Air Valves
Place the retainer ring
over the valve base and
screw the valve into the
base. Unscrew the
outer cap on the valve
to reveal the inflation
port.
Foot Pump
The foot pump is a high
capacity pump made of
durable ABS plastic. To
use simply press the
two halves of the foot
pump together and con-
nect the hose to the in-
flation port marked
OUT.
The triple nozzle
adapter comes with the
foot pump and is
needed to inflate both
the one-way air valve
and the pipe valves.
Insert the ribbed end of
the large rounded
adapter piece into the
hose of your foot pump.
To inflate a one-way
valve, simply place the
adapter into the valve
and begin pumping with
your foot pump. When
you’re finished, screw
the outer cap of the
valve closed.
Inflation Valves & Pumps
MB-80 Electric Pump
(OPTIONAL)
This electric pump
works using the 12V
power outlet in your car.
Please note that the
star shaped valve
adapters and deflation
cap are not necessary
for Sea Eagle boats.
First, make sure your
pump is switched OFF
and then insert the
power adapter into the
power outlet. If you
have a weak battery
you may want to keep
your engine running
while you’re using the
pump.
No extra nozzles are
needed to inflate the
main air chambers of
your boat, just insert the
pump into the valve and
switch it on. Do not drop
or suddenly move the
pump while it is
Air compressors that
are designed for other
uses like tire inflation
(usually around 50 PSI)
can easily harm your
Sea Eagle which works
at a much lower pres-
sure of 1.1 PSI. For this
reason we recommend
only using Sea Eagle
pumps.
4