Sierra Video EMD-218 - Manual (Page 20)

Page 20 of 29 EMD-218 Owner’s Manual
• (V 2.2)
Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGear
TM
frames and controller
cards from a computer. The DashBoard software and manual can be downloaded from the Sierra Video
Systems website.
Using the Menus
You must first install the DashBoard Control System software on your computer. Refer to the
DashBoard User Manual for software installation procedures and for using the DashBoard interface.
The Menu System
The following table and sections describe the menus, items, and parameters available from the
DashBoard Control System software for the card.
Table 3. DashBoard Menus
Menu Item Format Description
Card Info
(Read-only)
Product EMD-218 The product name
Manufacturer
Sierra Video Systems The manufacturer of the
product
Software Release
Number ### The release number of the
firmware in this card
Software Build
Date ### The internal build number
of this software
Software Build
Time ### The date and time the
software was created
+12 V Power Rail #.## W Positive Supply Power
-7.5 Power Rail #.## W Negative Supply Power
Video Input
Standard
############
Detected Video Standard
on SDI or Analog Input