Smithco Super Rake 13-55х (sn 6329 – 6449/1136 -1199) Parts & Service Manual - Manual (Page 93)

91
Accessories
13-684 SAND RAKE BRUSH KIT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 13-683 Brush Track 1
2 13-682 Brush 77 x 11 1
3 13-688 Brush Channel 1
4 HB-14-20-075 Bolt 1 /
4
- 20 x 3 /
4
8
HNFL-14-20 Flange Whiz-Lock Nut 1 /
4
- 20 8
5 13-681 Mounting Brackets 2
6 HB-14-20-150 Bolt 1 /
4
- 20 x 1 1 /
2
4
HNFL-14-20 Flange Whiz-Lock Nuts 1 /
4
- 20 4
INSTALLATION INSTRUCTIONS
To be used with 13-438 and 13-606 Rakes.
1. Place the brush (Ref 2) into the brush track (Ref 1). Place the brush channel (Ref 3) between the brush
track and the mounting brackets. Now bolt the mounting brackets (Ref 5) to the brush track using the 3 /
4
"
bolts and flange whiz-lock nuts (Ref 3).
2. Two holes need to be drilled into the drawbar of the rake to install the brush. Drill two .281 holes 2 1 /
4
" in
from each end and 3" apart (see drawing).
3. Mount the brush assembly to the drawbar using four 3/4" bolts and flange whiz-lock nuts (Ref 5).