SOLAC CVG9900 - Manual (Page 13)

OPERATION 13
en
1 Extend the cable fully and plug in the appliance.
Stand the CVG upright.
Z
A buzzer will sound and all the icons on the screen will be displayed, indicating that the
appliance is working correctly. The icons and (fig. 1A) will then start to
flicker.
When the CVG reaches the selected temperature, the icons will light up continuously.
(fig. 1B).
2 Select the desired working temperature according to the garment to be ironed (see
“TEMPERATURE SELECTION (fig. 2)”).
3 Select ironing with steam function (medium or maximum) or ironing without steam
function, as required (see STEAM SELECTION (fig. 3)”).
4 If you wish, you can lock the touchscreen to prevent the accidental activation or
deactivation of any function. To do so:
Without touching the handle, press the temperature selector for more than 3 seconds
(5). (fig. 4).
Z
The icon will light up.
5 To unlock the touchscreen, press the temperature selector (5) once again, without
touching the CVG's handle. The icon will disappear.
6 Take the CVG by the handle and move the hotplate over the garment to be ironed.
TEMPERATURE SELECTION (fig. 2)
The CVG has 4 temperature positions for you to choose between, by pressing the
temperature selector (5).
1 Press the temperature selector (5) as many times as necessary until the desired
temperature level is displayed.
Position ( ) (default position)
Position (••) (fig. 2A)
Position (•••) (fig. 2B)
Position (MAX) (fig. 2C)
i
The corresponding icon will flicker until the temperature selected has been reached.
Once this temperature has been reached, the icon will light up continuously.
STEAM SELECTION (fig. 3)
The CVG has two steam positions; medium steam (35 gr/min) and maximum steam (60 gr/
min). To select the desired steam level:
1 Press the steam selector (6) as many times as necessary until the desired steam flow
icon is displayed (medium (fig. 3A) or maximum (fig. 3B)). Steam will start to
be emitted.
i
If the steam selector is selected without having reached the desired temperature, the
steam selector icon and temperature icon selected will flicker until the working
temperature is reached (fig. 3C). Once this temperature has been reached, they will no
longer flicker simultaneously and steam will start to be emitted.
2 To stop the emission of steam, press the steam selector again (6) until the icon is
displayed, and steam will stop being emitted automatically.
PRESENCE SENSOR
The CVG has a presence sensor which stops the emission of steam immediately after
detecting lack of contact on the handle. This ensures lower power consumption as well as
greater autonomy of the tank (lower water consumption).
The steam function switches back on automatically when taking hold of the CVG handle.
BOOKCVG9900.book Page 13 Friday, April 16, 2010 1:59 PM
OPERATION
Designed exclusively for ironing clothes. Do not use it for other purposes.‹If the appliance
is hot, handle it carefully and do not touch the hotplate.‹Never leave the CVG with the
hotplate in a horizontal position. Stand it upright whenyou are not ironing.