SoundFreaq SFQ-03 - Manual (Page 19)

.18.
External DC IN (for AC adapter), AUX IN
DC 20 V 4.47 A (External DC IN)
Input: AC 100-240V, 50/60Hz
Output: DC 20 V 4.47 A
440mm (W) * 162mm (H) * 190mm (D)
3.18Kg
Model
Type
Support Bluetooth
Support Profile
Bluetooth 1.2, 2.0 and 2.1 compliant
Sound Stack
A2DP
Input Sensitivity/Impedance AUX Input 1200 mV
Tuner
Band
Tuning Range
Frequency Step
Preset Stations
Input Terminal
Power Source
AC Adapter
Dimensions (Approx.)
Weight
Technical Specifications
SFQ-03
FM
87.5 ~ 108.0 MHz
100 KHz
20
a. Right click the “Sound Stack” icon in the “Device and Printer” dialog box.
b. Open the “Sound Stack Properties” dialog box and select the “Services” tab.
c.
Put the ticks on the “Audio Sink” and “Remote Control” boxes.
d. Press the “Apply” button and the exclamation mark of the “Sound Stack”
driver icon will be cleared.
Bluetooth connection cannot
be established between the
system and your Lenovo PC
with Win 7 OS.
In These Cases Check the following points
Bluetooth connection cannot
be established.
• When making a Bluetooth connection between the unit and your device for
the first time, if the connection is fail, you need to power off your device and
power on again to clear the device name, and make the connection again.
• You need to reset the unit first and then make the Bluetooth connection
again.
Using the below method to reset the unit:
a. Set the unit to standby mode.
b. Press the Vol +, U-Cubed and buttons simultaneously. All the source
indicators near the iPod docking should be lit up, indicating that the
resetting is successful.