SP Controls AmpLINC System - Manual (Page 5)

16
7 Warranty Information
6.1 Warranty Summary
All SP Controls amplifiers and accessories, unless excluded in this
summary, are covered by a 3-year limited warranty on parts and
labor from the date of purchase. In order to be eligible for war-
ranty repairs, the amplifiers and accessories must have been pur-
chased through an authorized SP Controls dealer and submitted
by the original purchaser. This warranty is only valid in the country
in which the amplifier was purchased.
7.1.1 Eligibility Requirements.
SP Controls warrants against all malfunctions which come as a
result of component or manufacturer defect. The amplifier is also
covered from all failures which arise during the warranty period (3
years from date of purchase) that are not a result of misuse. The
following actions will void your warranty:
 The power cord or AC plug has been damaged through
misuse.
 The amplifier has been exposed to moisture or extreme tem-
peratures.
 The amplifier has been dropped, items have been dropped
on the amplifier, or the enclosure has been damaged.
 The amplifier has been opened by the operator.
 The amplifier was improperly packaged when sending to
the factory for repair, resulting in damage.
 Any of the precautions or instructions found in this manual
were not followed.
Damages resulting to the amplifier which are not covered under
this warranty can be factory-repaired at cost to the customer.
Use the contact information below to initiate the repair process.
7.2 Return Procedure
This section includes the return procedures which must be fol-
lowed in order to prevent processing delay or cost to the cus-
5
1 Welcome
Congratulations on the purchase of your new SP Controls Am-
pLINC System. If after reading this manual you should have any
questions concerning amplifier installation and operation, please
contact your Authorized SP Controls dealer, or you may contact
us directly using the contact information provided on the back of
this manual.
1.1 Features
Your AmpLINC System is the result of years of experience in the
design and manufacture of quality electronics. As such it pro-
vides a combination of performance and operational benefits
that simply cannot be found in conventional amplifiers.
 Distributes audio and power over Cat5 cables
 Compact hub and subcompact nodes
 Nodes have selectable wattage and channels
 Efficient Class D microamplifier inside every node
 Clean full–range dynamic power
 Signal Sense Technology for Energy Star Compliance
 Easy to install distributed audio solution
 External inline power supply
1.2 Using this Manual
In order to obtain maximum performance from your AmpLINC
System, please take time to read this brief owner’s manual and
carefully follow the guidelines for connection and operation.
This manual provides you with the information necessary to safely
install and operate your new AmpLINC System in the most com-
mon scenarios. If you find yourself requiring additional assistance,
please feel free to contact your Authorized Dealer, or you may
contact us directly using the information provided on the back of