Sundance SMT356 - Manual (Page 5)

Version 2.1 Page 5 of 26 SMT356356 User Manual
EMC
This module is designed to operate from within an enclosed host system, which is
built to provide EMC shielding. Operation within the EU EMC guidelines is not
guaranteed unless it is installed within an adequate host system.
This module is protected from damage by fast voltage transients originating from
outside the host system which may be introduced through the output cables.
Short circuiting any output to ground does not cause the host PC system to lock up
or reboot.
Power
This module must be fixed to a TIM40 compliant carrier board. Additionally, a 3v3
power source must be provided to the fixings. This is normally achieved by means of
a power source provided directly through conducting pillars on the carrier board.
Power for the analog components on this module is provided by on-board dc-dc
converters. All of the analog circuitry is shielded on the top and bottom of the module
using custom RFI shielding cans.