Sundance SMT9650 - Manual (Page 23)

Document No.
S M T 9 6 5 0 U s e r G u i d e
Revision
3 . 0
Date
2 9 D e c 2 0 0 6
Page
23 of 36
8 DEMONSTRATION 3
This demonstration can be found in the \Demos\Demo3\ sub-folder of the SMT9650 installation folder;
this will be C:\SundanceDSP\SMT9650\Demos\Demo3\ by default. It takes four channels of 16-bit data
from the SMT364 and passes them through an SMT398 which multiplexes them into a single output
stream. This stream is passed to an SMT374 which demultiplexes it and displays the resulting four
streams.
The SMT148 hardware for this demonstration is shown in the picture below 2 :
The Simulink model for this demonstration is as follows:
2 The SMT361Q is not used in this demonstration.