13 installation – Sundance SMT9650 User Manual
Page 30
Advertising
Document No.
S M T 9 6 5 0 U s e r G u i d e
Revision
3 . 0
Date
2 9 D e c 2 0 0 6
Page
30 of 36
13
INSTALLATION
Before installing the SMT9650:
● Make sure that all the required software components have been installed and configured properly;
● Close any instances of Matlab.
To install the SMT9650, run SMT9650_setup_vX_X.exe from the installation CD, where X_X
denotes the SMT9650 version number. For example, use SMT9650_setup_v4_0.exe to install
SMT9650 version 4.0.
You should see the following window.
Figure 4: Setup step 1, Password page.
Enter your password and press next. Please contact your reseller if you have not been given a password.
Press Next> to continue to the welcome page, and then press Next> again.
Advertising