Super Systems AC20 Quick Start - Manual

Super Systems Inc. 1 1 (800)-666-4330
Cincinnati, OH 45241 Fax: (513) 772-0060
//Ssio1/main/.ssimanuals/ac20qs www.supersystems.com
Keyboard Description:
MENU Is used to select a parameter group
FUNC: when the instrument is in Normal Display Mode changes the indication on
the lower display (default display is % of control output)
MAN: When the instrument is in Normal Display Mode, pushing MAN for more
than one second enables or disables the manual function
Press
⇑⇑
Key during parameter modification to increase the value of the selected
parameter.
Press
⇑⇑
Key during MANUAL Mode to increase the output value
Press
⇓⇓
Key During parameter modification to decrease the value of the
selected parameter.
Press
⇓⇓
Key during MANUAL Mode to decrease the output value
Press TST+MAN Hold TST and then press MAN button to start the Burnoff
function. *
Press TST+FUNC Hold TST, then press FUNC Button to start the Probetest
function.
∗
Test + MENU Are used to start the lamp test function (the command is accepted
when push-buttons are kept depressed for more that 5 seconds and the
instrument is in normal display mode)
Press TEST + FUNC during parameter modification to increase/decrease the
value under modification to higher rate.
Press TEST+MAN during parameter modification to jump to the max or min
programmable value.
∗
Two conditions apply: First, the burnoff function must be configured and second, it must be at
least 10 minutes from the last burnoff, for the test to st
art
SSi
AC20 Quick Start Instructions