SVSi N8000 Control API - Manual (Page 4)

4 N8000 Series Direct Control API www.svsiav.com
Encoder Commands
Encoder Commands
Command Description
Required
Variables
Example
N-Series
Support V-Series
Support
live Sets Encoder or Decoder to live play mode. Encoder IP live 169.254.104.1 <┘ Y Y
modeoff Disables the Encoder from broadcasting any
traffic to the network. If any Encoders are
viewing this stream, they will transition to local
play (loss of stream). Encoder IP modeoff 169.254.105.25<┘ Y Y
local Activates a Host playlist. Valid options are 1-8. Encoder IP and
playlist number local 169.254.30.238 1 <┘ Y Y
serial Sends stored serial command (referenced by
CommandID #) to device at IP address.
Command not valid for V-Series Encoders. Encoder IP and
serial command
ID serial 169.254.17.88 29<┘ Y N
serialhex Sends raw serial command (HEX) to device
through N-Command. Wait time determines
time for N-Command to automatically ask for
the response from the attached device. wait time (in
seconds),
Encoder IP,
serial command
HEX serialhex 1 169.254.17.88 43 4f 4d 4d
41 4e 44<┘ Y N
serialhex Sends raw serial command (ASCII) to device
through N-Command. Wait time determines
time for N-Command to automatically ask for
the response from the attached device. wait time (in
seconds),
Encoder IP,
serial command
ASCII serialhex 1 169.254.17.88
"COMMAND"<┘ Y N
readresponse Reads the response from a serial command
sent from N-Command where "Read
Response" checkbox was enabled when
command is saved, or serialhex command is
used. Encoder IP readresponse 169.254.17.88<┘ Y N
sendir N-Series devices only: Executes IR command
saved on Encoder/Decoder. Reference is by
name, and is case sensitive. Encoder IP,
command name sendir 169.254.212.1 Play<┘ Y N
sendirraw N-Series devices only: Executes IR command
without saving command on device. Uses long
form Pronto HEX Codes provided by
equipment manufacturer. Encoder IP, IR
pronto code sendirraw 169.254.38.121 0000 006C
0022 0000 015B 00AD 016 0016
0016 0016 0016 0041 0016 0016 0016
0016 0016 0016 0016 0016
0016 0041 0016 0041 0016 0016 0016
0016 0016 0041 0016 0041
0016 0041 0016 0041 0016 0016 0016
0016 0016 0041 0016 0016
0016 0016 0016 0041 0016 0016 0016
0016 0016 0016 0016 0041
0016 0016 0016 0041 0016 0041 0016
0016 0016 0041 0016 0041
0016 0041 0016 0622<┘ Y N
audioon Enables audio output for Encoder or Decoder. Encoder IP audioon 169.254.30.238<┘ Y Y
audiooff Disables audio output for Encoder or Decoder. Encoder IP audiooff 169.254.30.238<┘ Y Y
enablecc Enables Color Space Correction (use if screen
is pink or green). Encoder IP enablecc 169.254.105.1<┘ Y Y
disablecc Disables Color Space Correction (use if screen
is pink or green). Encoder IP disablecc 169.254.105.1<┘ Y Y
autocc Sets Color Space Correction to Auto (N-Series
Encoders ONLY). Encoder IP autocc 169.254.105.1<┘ Y N
enablehdmiaudio Enables HDMI audio on Encoder (if video
source is analog, this is disabled by default). Encoder IP enablehdmiaudio 169.254.105.1<┘ Y Y
disablehdmiaudio Disables HDMI audio, and will only use Analog
Audio connection. Encoder IP disablehdmiaudio 169.254.105.1<┘ Y Y
autohdmiaudio N-Series devices only: Encoder detects HDMI
audio support via Source EDID information and
enables/disables as appropriate. Encoder IP autohdmiaudio 169.254.105.1<┘ Y N
uncompressedoff Turns compression on for V-Series Encoder. Encoder IP uncompressedoff 169.254.229.208<┘ N Y