Teac SR-LUXi - Manual (Page 18)

18
Listening to an External Source
1 Connect the AUX IN jack of the SR-LUXi to the
PHONES jack (audio output jack) of a portable
audio player using the supplied stereo mini-
plug cable.
< You can use this means of connection to listen to
an iPod that do not have a dock connector.
For information on iPod/iPhone compatibility, see
page 12.
2 Press the FUNCTION button to select AUX.
< You can also use the AUX button on the remote
control unit to select AUX.
3 Play the source, and adjust the volume of both
the SR-LUXi and the connected audio player.
< When using the PHONES jack of the audio player,
you must adjust its volume or you might not hear
any sound from the SR-LUXi.
< Turning the volume of the audio player up too high
might cause the sound output by the SR-LUXi to
be distorted. If this happens, reduce the volume
of the audio player until the distortion stops and
then adjust the volume level of the SR-LUXi to a
comfortable listening level.