Basic operation with timeline synchronization, Timecode offset, Rechase – Teac HS-2000 User Manual

Page 137: 14 – timecode synchronization

Advertising
background image

TASCAM HS-2000

137

14 – Timecode synchronization

Basic operation with timeline

synchronization

1. In timeline mode, load the session that you want to

record or play back.

2. Either of the following operations will enable timeline

synchronization.

While pressing and holding the

0

SHIFT key, press the CALL

[CHASE] key on the front panel.
On the

0

SYNC

page of the

SYNC T/C

screen, set TC Chase

to ON. The

CHASE

indicator will appear in place of the TC indi-

cator on the Home Screen.

3. Press PLAY key to start synchronized playback or PLAY

and RECORD keys to start synchronized recording. The

CHASE

indicator on the Home Screen appears green.

4. Press the STOP key during recording or playback with

timecode synchronization to stop the transport. The

CHASE

indicator on the Home Screen blinks when

stopped.

5. To resume recording and playback with timecode

synchronization, repeat steps 3 and 4.

6. Either of the following operations will disable

synchronization.

While pressing and holding the

0

SHIFT key, press the CALL

[CHASE] key on the front panel.
On the

0

SYNC

page of the

SYNC T/C

screen, set TC Chase

to OFF.

NOTE

In either case, recording or playback will continue without

interruption. The TC indicator will appear in place of the

CHASE

indicator on the Home Screen.

Timecode offset

You can set an offset for master timecode synchronization.

By doing so, you can synchronize to master timecode for

playback with a set time difference (see “SYNC page” on

page 104).

Rechase

This unit continues to monitor master timecode even

after synchronized playback starts. Should the playback

time of this unit and the master timecode become

unsynchronized for any reason, the unit can “rechase”

the timecode. You can set whether or not the unit uses

rechase and the degree of the discrepancy that must

occur before rechasing (see “SYNC page” on page 104).

CAUTION

During synchronized recording, this unit only

synchronizes to the master timecode once at the start of

recording. There is no rechase function as there is with

synchronized playback.

Advertising