Tecfluid CU Series - Manual (Page 25)

25
6 CONVERTER PROGRAMMING
By programming the converter the visualization and the outputs of the instrument can be
configured.
Turn on the converter and press (OK) to enter the main menu. The following screen
appears.
Once the password is entered, the first screen allows to choose between the different
programming options.
6.1 Language
You can choose the language in which all the menus will be displayed.
With the keys (2) and (8), select Programming, and then validate with the key (OK).
To access the programming of the converter, you must enter the password. At first
access, the default password is 0123. For more details about the password, see
paragraph 4.1, page 11.
CONVERTER PROGRAMMING
6