Thermo Technologies SBB Solar Storage Tank - Manual (Page 9)

6.9 Screw-in unit BGC
BGC is screwed into a 1 “ bushing into the front side of the storage tank. This is then locked with a 4-corner plug SW22.
As an alternative the bushing can be dismantled with a 12-corner nut SW26.
The installation instructions of the screw-in heater must be observed.
7. Tips for the User
Routine maintenance improves operating safety and life expectancy of the solar hot water storage tank SBB … K SOL.
Solar Collector/Solar Storage Tank Warranty Statement
Residential and Commercial Warranty: Stiebel Eltron warrants to the original owner that the SOL 25 S - Flat
Plate Solar Collector will be free from defects in workmanship and materials for a period of ten (10) years from
the date of purchase. In addition, the SBB 300, SBB 400 and SBB 600 plus storage tanks are warranted to the
original or subsequent user for a period of (7) years.
Should the part(s) prove to be defective under normal use during this period, Stiebel Eltron, Inc. will be
responsible for replacement of the defective part(s) only. Stiebel Eltron, Inc. will not be liable for any costs of
transportation, removal, reinstallation, or any other labor or freight charges that may arise in connection with a
warranty claim or any incidental or consequential expenses.
This warranty does not apply to conditions resulting from a failed component or part that is not part of the solar
collector, absorber plate or storage tank; to freeze damage; to conditions resulting from misuse, abuse,
neglect, accident, or alteration; to minor discoloration of the collector framewall, absorber plate or storage tank
skin over time; to glass breakage; to conditions resulting from the introduction of harmful chemicals, caustic
fluids, or liquids deleterious to copper tubing, including improperly applied or maintained heat transfer fluids; to
propylene glycol pH levels above 10 or below 8; to periods of stagnation in excess of 60 days; to excessive
pressure; to clouding or similar occurrence resulting from the normal intrusion of moisture into the collector
box; to conditions resulting from floods, earthquakes, winds, fire, lightning, or circumstances beyond the
manufacturer's control; to installation methods which do not conform to relevant national, state or local codes
and ordinances, good industry practices or applicable manuals, diagrams, technical bulletins or written
installation instructions; and, to applications other than medium temperature.
To obtain service under this warranty, the owner must first secure written authorization from Stiebel Eltron, Inc.
The owner shall be required to show proof of purchase date, and to pay all transportation costs to return the
defective part(s) for repair or replacement.
242 Suffolk Street
Holyoke, MA 01040
Phone: (800) 582-8423 or (413) 538-7850
Fax: (413) 538-8555
E-Mail: [email protected]
Web: www.stiebel-eltron-usa.com