Tri Tool CBM-3 Counterbore Module - Manual (Page 17)

17
Model CBM-3 Counterbore Module
92-0227 : Rev. 070529
Problem: There is a Loss of Air Power
The air supply pressure is too low.
The air filter is plugged.
The air line size is insufficient.
The air line is too long.
Problem: There is a Loss of Hydraulic Power
The hydraulic supply pressure is too low.
The hydraulic filter is plugged.
The hydraulic line size is insufficient.
The hydraulic line is too long.
Problem: The Tool Bit will not Reach the Work
Incorrect tool blocks are installed for the size of the pipe or tube being worked
on.
Incorrect tool bit is installed.
Problem: The Hydraulic Motor will not Start
The hydraulic power supply is shut off.
The hydraulic motor is damaged and will not run free.