Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 118)

3-86 W A N s u i t e 7 1 0 5
The DHCP Server Details screen provides the following user-activated
buttons:
DHCP Host Table Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Host Table screen
(Figure 3.82), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Host Details screen (Figure 3.83)
accessed by clicking on the appropriate numbered link under the “Index”
column.
Figure 3.82 DHCP Host Table Screen
Host Name The name of the DHCP Server. Default is none.
The DHCP Host Table screen provides the following user-activated buttons:
NOTICE: You must Save and Restart for the new Server name to become active.
Button Function
Submit Sets any values that have been changed.
Host Table Lists Host names (DHCP server identification).
Static Entry Table Creates a list of static IP addresses associated with MAC
addresses.
IP Address List Table Defines the addresses available for DHCP clients.
IP Address Status Table Displays DHCP Server statistics.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Adds a new Server name.