Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 176)

4-42 W A N s u i t e 7 1 0 5
Applications
Select “Applications” in the Main Menu screen to display the various
WANsuite 7105 applications (Figure 4.35) associated with configuration
tables and statistics for Layer 3 and above that do not map to a specific
service or interface.
Figure 4.35 Applications Screen
Endpoint Table Screen
The Endpoint Table (Figure 4.36) describes all endpoints terminating in the
unit; user-selectable prompts are provided to view the Endpoint Details,
Endpoint Service Details, and Endpoint DLCI Details screens. The unit will
automatically learn all DLCIs from the Network side and relay that
information on the Serial side with default values.
The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database either when you perform a “Save and Restart” or
automatically every 15 minutes.
NOTICE: The Endpoint Table and its corresponding DLCIs will be saved in the
configuration database only after at least one endpoint parameter has
been changed and submitted in the Endpoint Details Screen on
page 4-43. When in IP Gateway, if you decide to use a “discovered”
endpoint, you must rename it. A discovered endpoint cannot be used
elsewhere (i.e., IP Gateway) until it has been renamed. Also, it will not
be saved in the configuration database.